Quick Answer: What Power Do I Need?
Here’s a simplified starting point based on the thickest mild steel you need to cut:
| Max Material Thickness (Mild Steel) | Recommended Laser Power | Typical Applications |
|---|---|---|
| ≤ 3 mm | 1000W – 1500W | Sheet metal, thin panels, electronics, jewelry |
| ≤ 6 mm | 1500W – 2000W | General fabrication, signs, kitchenware |
| ≤ 10 mm | 2000W – 3000W | Medium fabrication, structural parts, chassis |
| ≤ 16 mm | 3000W – 4000W | Heavy fabrication, industrial parts |
| ≤ 25 mm | 6000W – 8000W | Heavy industrial, thick plate cutting |
| > 25 mm | 10,000W+ | Heavy industry, shipbuilding, steel service centers |
Important: These are general guidelines for mild steel. Stainless steel and aluminum require more power for the same thickness. Keep reading for material-specific recommendations. For more on keeping your machine in top condition, see our Fiber Laser Cutting Machine Maintenance Guide.
Why Power Matters
Laser power is the single biggest factor determining:
- Maximum cutting thickness — thicker materials need more power
- Cutting speed — more power = faster cuts on thin-to-medium materials
- Cut quality — having enough power reserve produces cleaner edges
- Machine price — higher power machines cost significantly more
- Operating cost — more power uses more electricity and consumables
The goal is to choose enough power for your current and near-future needs, but not so much that you’re wasting money on unused capacity.
Factors That Determine Your Power Requirement
1. Material Type
Different materials absorb laser energy differently, so the same power cuts different materials at different thicknesses:
| Material | 1500W | 2000W | 3000W | 6000W |
|---|---|---|---|---|
| Mild steel | 6 mm | 8 mm | 12 mm | 20 mm |
| Stainless steel | 3 mm | 5 mm | 8 mm | 16 mm |
| Aluminum | 2 mm | 3 mm | 6 mm | 12 mm |
| Brass | 1.5 mm | 2.5 mm | 4 mm | 8 mm |
| Copper | 1 mm | 2 mm | 3 mm | 6 mm |
Key takeaway:
– Mild steel is the easiest to cut — you get the most thickness per watt
– Stainless steel is harder — expect about 60–70% of the mild steel thickness
– Aluminum is even harder — about 40–50% of mild steel thickness
– Copper and brass are the hardest reflective metals — about 20–30% of mild steel thickness
If you primarily cut stainless steel or aluminum, you’ll need more power than the mild steel numbers suggest.
2. Material Thickness
This is the most obvious factor, but it’s also the most important. Ask yourself:
- What’s the thickest material you regularly cut?
- What’s the thickest material you might need to cut in the next 2–3 years?
- What percentage of your work is thin material vs. thick material?
Rule of thumb: Choose a machine that can comfortably cut your thickest material at a reasonable speed, not one that can barely cut it. If you regularly cut 6mm steel, a 1500W machine can do it, but it will be slow and the edge quality won’t be great. A 2000W or 3000W machine will do it much faster and with better quality.
3. Production Volume and Speed Requirements
How much cutting do you need to do per day? If you’re a job shop running 8+ hours a day, cutting speed directly affects your revenue.
Example: Cutting 3mm mild steel parts
– 1000W: ~4 m/min cutting speed
– 1500W: ~8 m/min cutting speed
– 2000W: ~12 m/min cutting speed
– 3000W: ~16 m/min cutting speed
A 3000W machine cuts 3mm steel 4x faster than a 1000W machine. If you’re running production, that’s a huge difference in throughput.
But if you only cut a few parts per day, the extra speed may not be worth the extra cost.
4. Cut Quality Requirements
Not all cuts are equal. Some applications need perfectly smooth, dross-free edges, while others are fine with a rougher cut that gets cleaned up later.
- High-quality cuts (visible parts, precision components) → choose more power than the minimum required. Having power in reserve produces cleaner edges.
- Functional cuts (welded assemblies, hidden parts) → minimum acceptable power is fine.
5. Future Growth
A fiber laser cutting machine is a 5–10 year investment. Think about where your business will be in that time:
- Will you be taking on thicker materials?
- Will your production volume increase?
- Will you be adding new materials?
It’s often wise to buy one power level above what you currently need, to account for future growth. But don’t go overboard — jumping from 1500W to 6000W “just in case” is usually not a good financial decision.
Power Level Breakdown: What Each Level Is Good For
1000W – Entry-Level / Light Duty
Price range: $5,000 – $10,000 (small format)
Best for:
– Hobbyists, small workshops, makerspaces
– Thin sheet metal work (≤ 3mm steel)
– Jewelry, crafts, small parts
– Signs and decorative items
– Businesses just getting started with laser cutting
Limitations:
– Slow on anything over 3mm steel
– Can’t cut thick materials
– Not suitable for production environments
Who should NOT buy 1000W:
– If you regularly cut 4mm+ steel
– If you need production-level speed
– If you plan to cut stainless steel or aluminum
1500W – Most Popular Entry-Level Industrial
Price range: $8,000 – $18,000 (standard format)
Best for:
– Small to medium fabrication shops
– General sheet metal work (up to 6mm steel, 3mm stainless)
– Kitchenware, lighting fixtures, metal furniture
– Sign shops and display manufacturers
– Job shops with mixed thin-to-medium work
Why it’s popular:
– Handles the vast majority of common sheet metal applications
– Good balance of speed, quality, and price
– Reasonable operating costs
– Compact machines available for small shops
Transon’s TS-F3015 1500W is a popular choice in this category, offering a 3000×1500mm work area and reliable Raycus or Maxphotonics laser source at a competitive price.
2000W – Versatile Mid-Range
Price range: $12,000 – $25,000
Best for:
– Medium to large fabrication shops
– Mixed production of thin and medium-thick materials
– Cutting up to 8mm steel, 5mm stainless, 3mm aluminum
– Higher production volumes
– Job shops handling a variety of work
Advantages over 1500W:
– 30–50% faster on thin materials
– Can cut thicker materials
– Better edge quality on medium thicknesses
– More power reserve for consistent results
This is the sweet spot for many professional fabrication shops — enough power for most jobs without the cost of a high-power machine.
3000W – Workhorse Industrial
Price range: $18,000 – $40,000
Best for:
– Industrial fabrication facilities
– Cutting up to 12mm steel, 8mm stainless, 6mm aluminum
– High-volume production
– Heavy-duty 8+ hour per day operation
– Structural steel, chassis, heavy equipment parts
Advantages:
– Very fast on thin and medium materials
– Handles thick materials comfortably
– Excellent cut quality across the full thickness range
– Built for heavy industrial use
– Good resale value
If you’re running a serious fabrication business and can afford it, 3000W is often the best long-term investment. It handles almost everything a typical shop encounters, with speed and quality to spare.
6000W – High-Power Production
Price range: $40,000 – $80,000
Best for:
– Heavy industrial manufacturing
– Cutting up to 20mm steel, 16mm stainless, 12mm aluminum
– Steel service centers
– High-volume production environments
– Shipbuilding, heavy equipment, agricultural machinery
When to consider 6000W:
– You regularly cut 10mm+ thick materials
– Speed is critical for your production
– You need to cut a wide range of thicknesses
– You’re replacing or supplementing plasma or flame cutting
6000W machines are significant investments, but for the right applications, the productivity gains justify the cost.
10,000W+ – Ultra High Power
Price range: $80,000+
Best for:
– Heavy industry and steel processing
– Cutting 25mm+ thick steel
– Replacing traditional cutting methods (plasma, flame, waterjet)
– Very high-volume operations
These machines are for specialized heavy industrial applications. Most fabrication shops don’t need this much power.
Common Mistakes to Avoid
Mistake 1: Buying Too Little Power
This is the most common mistake. Businesses often buy based on their thinnest material or their current volume, then find the machine can’t handle new work or growth.
Signs you’re underbuying:
– You’re choosing the minimum power that “can” cut your thickest material
– You expect business growth but aren’t accounting for it
– You’re comparing only on price, not capability
Better approach: Buy enough power to handle your thickest material comfortably, with some room for growth.
Mistake 2: Buying Too Much Power
On the other end, some businesses buy way more power than they need, thinking “more is always better.” But extra power costs more upfront, uses more electricity, and may not provide any benefit if you’re only cutting thin materials.
Signs you’re overbuying:
– You cut mostly 1–3mm sheet metal but are looking at 6000W machines
– You’re buying based on “what if” scenarios that are unlikely to happen
– The salesperson is pushing a higher-power machine without clear justification
Better approach: Match the power to your actual needs, plus a reasonable growth buffer.
Mistake 3: Only Looking at Maximum Thickness
A machine that “can cut 12mm steel” might cut it very slowly with poor edge quality. Always ask about cutting speed and edge quality at your target thickness, not just whether it’s technically possible.
Mistake 4: Ignoring Operating Costs
Higher power machines cost more to run:
– More electricity consumption
– Faster consumable wear (nozzles, lenses)
– More expensive replacement parts
– May require larger power supply and ventilation
Factor these into your total cost of ownership calculation.
Mistake 5: Forgetting About Bed Size
Power is important, but so is the work area. A 3000W machine with a 1300×900mm bed won’t help you cut 4×8 ft sheets. Make sure the machine format matches the material sizes you work with.
How to Figure Out Exactly What You Need
Step 1: List Your Materials and Thicknesses
Make a table of every material you cut (or plan to cut) and the thickness range:
| Material | Min Thickness | Max Thickness | % of Work |
|---|---|---|---|
| Mild steel | 1 mm | 8 mm | 60% |
| Stainless steel | 1 mm | 5 mm | 25% |
| Aluminum | 1 mm | 3 mm | 15% |
Step 2: Determine Your Production Volume
- How many hours per day do you cut?
- What’s your typical batch size?
- Is speed critical for meeting deadlines?
Step 3: Calculate Required Speed
For your most common job, estimate how much cutting speed you need to meet production targets.
Step 4: Get Sample Cuts
The best way to know if a machine will work for you is to send samples to the manufacturer and have them cut your actual parts. Ask for:
– Cut samples at different power levels
– Speed data for each material/thickness
– Edge quality photos
– Information about dross and post-processing needs
Transon Laser offers free sample cutting tests — send them your drawings and material specifications, and they’ll cut samples and send them back to you, along with detailed speed and quality data.
Step 5: Consider Total Cost of Ownership
Don’t just look at the purchase price. Factor in:
– Electricity costs
– Consumable costs (nozzles, lenses, mirrors)
– Maintenance and service
– Expected lifespan
– Resale value
Final Recommendation
For most small to medium metal fabrication businesses, we recommend:
| Business Type | Recommended Power | Why |
|---|---|---|
| Start-up / small shop | 1500W | Handles most common sheet metal work at an affordable price |
| Growing fabrication shop | 2000W | Versatile — fast on thin materials, capable on medium thicknesses |
| Established industrial shop | 3000W | Workhorse power for serious production and thick materials |
| Heavy industry / steel service | 6000W+ | For thick plate and high-volume cutting |
Our most common recommendation: 2000W or 3000W. These power levels cover the vast majority of industrial fabrication work, offer excellent productivity, and provide enough headroom for business growth.
If you’re still not sure, err on the side of more power, not less. It’s common for businesses to wish they’d bought a more powerful machine within 1–2 years, but rare to hear someone say they regret buying too much power (as long as it’s within reason).
Ready to Get a Quote?
If you’ve determined what power you need and are ready for pricing, or if you still have questions and want expert advice, Transon Laser can help. Their English-speaking sales team can help you select the right machine for your application and budget, and they offer free sample cutting tests so you can see the results before you buy.
Transon’s most popular fiber laser cutting models:
– TS-F3015 (3000×1500mm bed) — available in 1000W to 6000W
– TS-F4020 (4000×2000mm bed) — available in 2000W to 12000W
– TSF-6060/6040/1390 (small format enclosed) — available in 1000W to 3000W
All machines come with reliable Raycus or Maxphotonics laser sources (IPG optional), comprehensive after-sales support, and a 2-year laser source warranty.
Further Reading:
– How to Choose a Fiber Laser Cutting Machine
– Fiber Laser Cutting Thickness & Speed Chart: 1kW to 20kW
– How Much Does a Fiber Laser Cutting Machine Cost?
– Fiber Laser vs CO2 Laser Cutting Machine Comparison
– Fiber Laser vs Plasma Cutting: Full Comparison
– Fiber Laser Cutting Machine Parameters: Complete Reference
Related Reading: For more details on how different power levels perform on various sheet metal materials — including real-world productivity examples — see our complete guide to fiber laser cutting for sheet metal fabrication.
Related Reading: For a dedicated deep dive on cutting stainless steel — nitrogen vs oxygen gas selection, speed charts by thickness and power, dross troubleshooting, and 304 vs 316 cuttability — see our complete guide to laser cutting stainless steel.
